SolidWorks CSWP Preparation


Advanced Part Modeling

  • Creating a part from a drawing.
  • Using linked dimensions and equations to aid in modeling.
  • Using equations to relate dimensions.
  • Updating parameters and dimension sizes.
  • Mass property analysis.
  • Modifying geometry on initial part to create a more complex part.
  • Modifying parameters on the part at different stages while maintaining all other dimensions and design intent.

Part Configurations & Part errors

  • Creating configurations from other configurations.
  • Changing configurations.
  • Creation of configurations using a Design Table.
  • Mass properties.
  • Changing and/or rearranging features of an existing SOLIDWORKS part.

Advanced Assembly

  • Creating an assembly.
  • Adding parts to an assembly.
  • Doing collision detection when moving a part in an assembly.
  • Interference detection.
  • Basic and advanced mates.
  • Rigid and Flexible subassemblies.
  • Replacing a part with another part in an assembly.
  • Creating a coordinate system.
  • Using a coordinate system to perform mass properties analysis.

Course Duration: 4 Days
Prerequisites: Basic SolidWorks knowledge (CSWA Level)
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

Advertisements

Autodesk Inventor Advanced Course


2D-Sketch

  • Sketch Using Relax Mode

3D-Sketch

  • Lines in 3D Space
  • Helical Curve
  • Bend – Automatic Bend
  • Intersection Curve
  • Silhouette Curve
  • Project to Surface & Curve on Face

Advanced Part

  • Create Multibody Part
  • Create iPart
  • Emboss text and Profiles

Advanced Assembly

  • Create a level of detail
  • Create a part in context of an assembly
  • Describe and use Shrinkwarp
  • Create a Positional Representation
  • Create components using the Design Accelerator commands
  • Modify a bill of materials
  • Use the frame generator commands

Surfaces

  • Patch
  • Sculpt Surfaces
  • Trim Surfaces
  • Ruled Surface
  • Replace Faces

Sheet Metal

  • Create and edit Sheet Metal Style
  • Create face
  • Sheet Metal Flange
  • Contour Flange
  • Contour Roll
  • Hem
  • Lofted Flange
  • Sheet Metal Bend
  • Fold – Unfold
  • Corner steam
  • Sheet Metal Rip
  • Create a flat pattern
  • Export DXF for Machining

Weldment

  • Create weldment file
  • Specify weldment Material and standard
  • Create Weldment Preparations
  • Fillet weld – Groove Weld – Cosmetic weld

Advanced Drawing

  • Edit Section View
  • Modify style in Drawing
  • Edit Hole table

Presentation File

  • Create Animation Video

Course Duration: 6 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

Autodesk Inventor Essential Training


Inventor User Interface

  • Ribbon Interface
  • Template Setup (Standard – Unit systems)

Project File

  • Create a New Project
  • Setup Project File Contents
  • Dealing with existing Projects

Part Modeling

  • Create a New Part File
  • Create Parameters and Equations
  • 2D-Sketches Features
  • Sketches Constrains – Dimensions
  • Sketches Patterns and Editing
  • 3D-Model Features (Extrude – Revolve – Sweep –  ….)
  • Advanced 3D-Model Features (Coil – Thread – Direct Editing – ….)
  • Work Feature (Axis – Point – Plane)
  • 3D Pattern (Rectangular – Circular – Sketch Pattern – Mirror)

Assembly Modeling

  • Assembly File Interface
  • Placing Parts
  • Placing Content Center files
  • Placing Non-Native Part like (SolidWorks) Files into Assembly File
  • Using Assembly Constrains and Joints
  • Driving constrains to Simulate Parts Movements
  • Replacing Files Techniques

Advanced Assembly Parts

  • Bolted Connections – Design Shafts and Stress Graphs
  • Design Calculators for (Power Transmissions – Bearing – Belts – Springs)

Drawing layout

  • Create Views – Section View – Retrieve Dimensions From parts
  • Create Tables -Annotations – Balloons – Hole Notes – Parts List

Course Duration: 8 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

SolidWorks Motion Analysis Course


Mechanical Mates

  • Cam and Follower
  • Slot
  • Hinge
  • Gear
  • Rack pinion
  • Screw
  • Universal Joint.

Kinematics

  • Sketch Block.
  • Creating Linkages.
  • Greeting Belts and Pulleys.
  • Modeling Cams and Followers.
  • Engage Block.
  • Layout Sketch Block.
  • Collision Detection.
  • Physical Dynamics.

Motion Studies

  • Introduction to User Interface.
  • Define the Constrains.
  • Define Forces, Gravity, Damping and Spring Specs.
  • Motion Drivers.
  • Building models for Kinematics Analysis.
  • 3D Contact to simulate realistic interaction between parts.
  • Create Displacement, Velocity, Acceleration and Force Graphics.
  • Export Results to SolidWorks Simulations (Stress Analysis).

Course Duration: 6 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

SOLIDWOKS Advanced Modeling Course


Sheet Metal Modeling

Sheet Metal Creation
  • Base Flange/Tab
  • Gauge Tables
  •  Convert 3D Model to Sheet Metal.
  • Lofted Bend
  •  Linear Edge Flange
  • Curved Edge Flange
  • Miter Flange
  • Cross Break
  • Jog
  • Sketched Bend
  •  Unfold and Fold
  •  Vent
  • Rip
  •  Flatten
Sheet Metal Drawing
  • Create sheet Metal Drawing Sheet.

Weldments

Weldment Creation
  • 3D-Sketching
  • Create Weldment Structure Profiles
  • Structural Members Types
  • Corner Treatment
  • Rotating Members Position
  • Locate Profile
  • Dealing with Groups
  • End Caps
  • Gussets
  • Trim/Extend Members
  • Cut List Folder Management
  • Activating Weldment Mode.
  • Weld Bead
Weldment Drawing
  • Cut List creation in the Weldment Drawing.

Surfaces

Surface Sketching
  • Create Spline
  • Project Curves on face
  • Project Curves on sketch
  • Intersection Curves
Creation Tools
  • (Extruded – Revolved – Swept – Lofted) Surface
  • Boundary Surface
  •  Filled Surface
  •  Planer Surface
  • Offset Surface
  •  Ruled surface
  •  Freeform
Modification Tools
  • Extend Surface
  • Trim Surface
  • Un-Trim Surface
  • Fillet
  • Knit surfaces
  • Thicken
  • Surface with Solids
  • Cut with Surface
  • Thicken Cut
  • Up to Surface
  • Fixes Surface Problems

Course Duration: 6 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

SolidWorks CSWP Course


 

2D-Sketches

  • Simple orders (Line – circle – Rectangle – Straight Slot, ete…).
  • Advanced Order (Trim entities – Convert entities – Pattern, ete…).
  • Sketched on Faces.
  • Smart Dimensions, Relations.
  • 3D-Features:
  • Extruded Boss/Base and Extruded Cut Boss/Base.
  • Revolved Boss/Base and Extruded Cut Boss/Base.
  • Swept Boss/Base and Extruded Cut Boss/Base.
  • Lofted Boss/Base and Extruded Cut Boss/Base.
  • Hole Wizard – Thread – Advanced Hole.
  • Modification on 3D-Features:
  • 3D Fillet and 3D Chamfer.
  • 3D Patterns.
  • Rib – Draft – Mirror – shell – ete…
  • References Geometry and Curves.

Assembly

  • Insert parts Ways.
  • Standard Mates (Coincident – Parallel, ete…).
  • Advanced Mates (Width – Path Mate, ete…).
  • Mechanical Mates (Gears – Cam, ete…).
  • Toolbox
  • Smart Fasteners
  • Collusion Detections – Interferences Detections.
  • Sensors – Assign Materials – Mass Properties.
  • Rigid and flexible Assembly.
  • Explode View

Advanced Modeling

  • Using Global Variables.
  • Configurations and Design Tables.
  • Assembly and Features Errors.

Drawing Tools

  • Drawing Sheet Setting
  • Standard Sizes – Scale – Create Templets.
  • View Layout
  • Basic View Creation
  • Section Views
  • Auxiliary Views
  • Alternate Position Views
  • Break View
  • Broken-out Section
  • Crop view
  • Smart Dimensions
  • Importing Model Items
  • Create notes
  • Balloons
  • Symbols
  • Hole Callout
  • Center Mark
  • Centerlines
  • Create Tables (General – BOM – Holes).
  • Linked notes
  • Drawing View Properties.
  • Show and Hide Components.
  • View Focus when creating 2D geometry.

Course Duration: 8 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

SolidWorks Essential Training


SolidWorks Basic Modeling Divided into two sections (3D-Modeling – Assembly – Drawing Sheets )

2D-Sketches

  • Simple orders (Line – circle – Rectangle – Straight Slot, ete…).
  • Advanced Order (Trim entities – Convert entities – Pattern, ete…).
  • Sketched on Faces.
  • Smart Dimensions, Relations.

3D-Features

  • Extruded Boss/Base and Extruded Cut Boss/Base.
  • Revolved Boss/Base and Extruded Cut Boss/Base.
  • Swept Boss/Base and Extruded Cut Boss/Base.
  • Lofted Boss/Base and Extruded Cut Boss/Base.
  • Hole Wizard – Thread – Advanced Hole.
  • Modification on 3D-Features:
  • 3D Fillet and 3D Chamfer & 3D Patterns.
  • Rib – Draft – Mirror – shell – ete…
  • References Geometry and Curves.

Assembly

  • Assembly Insert parts Ways.
  • Standard Mates (Coincident – Parallel, ete…).
  • Advanced Mates (Width – Path Mate, ete…).
  • Mechanical Mates (Gears – Cam, ete…).
  • Toolbox & Smart Fasteners
  • Collusion Detections – Interferences Detections.
  • Sensors – Assign Materials – Mass Properties.

Drawing Tools

  • Drawing Sheet Setting Standard Sizes – Scale – Create Templets.
  • View Layout Basic View Creation
  • Section Views
  • Auxiliary Views
  • Alternate Position Views
  • Break View
  • Broken-out Section
  • Crop view
  • Annotation Smart Dimensions
  • Importing Model Items
  • Create notes
  • Balloons
  • Symbols
  • Hole Callout
  • Center Mark
  • Centerlines
  • Create Tables (General – BOM – Holes)

Course Duration: 6 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center
For more detials, We will contact with you after Registeration.

Register From Here

 

AutoCAD 2017 Course


AutoCAD Course Content:

AutoCAD 2D

  • Understand AutoCAD-2D Interface & Workspace.
  • Basic Operations.
  • Drawing & Drafting Tools.
  • Editing Tools.
  • Precision Tools.
  • Using Layers.
  • Annotations.
  • Blocks.
  • Plot and Publish.

AutoCAD 3D

  • Understand AutoCAD-3D Interface & Workspace.
  • 3D-Modeling.
  • Creating Models from 2D Profiles.
  • Creating Composite Solids
  • Adding Detail to Your Solid Models.
  • Editing Solid Models.

Course Duration: 6 Days
Prerequisites: Known Fundamental of Mechanical Drawing
Place: Will be in one of Partener Training Center

Register From Here